Vỏ Raspberry Pi Squeezebox v 2.0

Case designed to fit a Raspberry Pi, touch screen display and speakers. 

This is the display I have used https://www.amazon.co.uk/gp/product/B07KJBCNS8/

The speakers - https://shop.pimoroni.com/products/5w-4-ohm-65mm-full-range-speaker

Speaker Bonnet - https://www.adafruit.com/product/3346

Buttons - https://thepihut.com/products/180-piece-ultimate-tactile-button-kit

Button caps - https://thepihut.com/products/black-soft-caps-for-tactile-buttons-1-pack

IR receiver - https://thepihut.com/products/ir-infrared-receiver-tsop38238

Light sensor - https://www.adafruit.com/product/4681

I removed the QT-QWIIC sockets from the light sensor to allow it to fit flush with the top.

All items printed at 0.2mm layer height with a 0.4mm nozzle. No supports

The M3 holes in the 2 side panels are 2.7mm to allow for the bolts to tap a thread except for the ones to attach the front which are M3 clearance holes.

All sides need to be printed with the outside face against the print bed.

Holes for bolts are M3.