Vỏ Case Raspberry Pi Squeezebox

Case designed to fit a Raspberry Pi, touch screen display and speakers. 

This is the display I have used https://www.amazon.co.uk/gp/product/B07KJBCNS8/

The speakers - https://shop.pimoroni.com/products/mini-speaker-4-3w

Speaker Bonnet - https://www.adafruit.com/product/3346

For the touch buttons - https://www.adafruit.com/product/1374 and https://www.adafruit.com/product/1362

All items printed at 0.16mm layer height with a 0.4mm nozzle. Supports are only required for the M3 holes in the 2 side panels.

The M3 holes in the 2 side panels are 2.7mm to allow for the bolts to tap a thread except for the ones to attach the front which are M3 clearance holes.

All sides need to be printed with the outside face against the print bed. The back can be printed either way.

Holes for bolts are M3 except for the 5 touch buttons which are M4.

4 x M3 nuts are required to sit inside the latches to hold the display in place.