
Vỏ cho Bảng Mạch Nguyên Mẫu PCB Mini ElectroCookie
- Downloads
- 80
- Likes
- 8
- Views
- 1,218
- Remixes
- 1
- Comments
- 0
Files 2 76.5 KB
- Case_Body_1765497829.stlSTL · 64.9 KB
- Case_Lid_1765497835.stlSTL · 11.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #129484
- Category
- DIY
- Published
Description
If you print in the orientation provided, you shouldn't need supports.
Also included in the photos is my Housing for the VL53L0X Time-of-Flight (TOF) sensor.
This case / project box is designed to fit the ElectroCookie Mini PCB Prototype Board is ideal for ESP8266 D1 projects.
-
Use short m2.5 screws to attach the PCB to the case
-
The smaller case hole is designed to accommodate a 2 pin JST-XH connector (power).
-
The larger case hole designed to accommodate a 4 pin JST-XH connector (such as i2c).
-
There are holes in the bottom that should accommodate #6 wood screws, in case you want to attach to something.
-
Updated pictures.
-
Revised model.
-
Tighten lid tolerance a touch. The i2c cable conflicted a bit with the ESP8266, so I moved the i2c hole up a tiny bit and move the PCB slightly lower.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament: Prusament PLA, 1.75 Some awesome green
Category: Tool Holders & Boxes
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 76.5 KB
- Largest file
- 64.9 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-
New -
New -

-

-



