Móc Treo (cho Prusa enclosure)

Keep your most used tools in reach with this handy peg that screws onto your Prusa enclosure with the handily provided extra hardware.

Insert the nut mid-print, then use an empty hole in the enclosure frame to screw it on.

If you don't want to insert a print pause yourself, use the provided .bgcode for MK4 printers.

Program a print pause when slicing to insert M3n nut!

Use the .step file to adjust the diameter and length for your needs.

Hardware:

• 1x M3n black nut
• 1x M3x8 black screw (2.5mm wrench required)

Print settings:

• Program print pause at 7.8mm (before nut cavity gets covered; layer 39 with 0.2mm layers) to insert M3n nut
• Brim
• 3d honeycomb infill, or another infill with 3d strength