Mô hình Nickola Tesla Đầu Lắc
Mô hình đầu lắc Nikola Tesla độc đáo, được làm bằng lò xo từ 3DPrinty. Hoàn hảo cho những người yêu thích khoa học và công nghệ. In bằng PLA, dễ lắp ráp.
271
Lượt Xem
12
Lượt Thích
55
Lượt Tải
Cập Nhật Dec 06, 2025
Mô tả
Nội dung được dịch bằng AI
Nickola Tesla Bobblehead
A bobblehead for Tesla. Made with 3DPrinty's springs.
This is a fun little bobblehead project featuring the brilliant inventor Nikola Tesla. It utilizes 3DPrinty's spring mechanism to give it that classic bobblehead wobble.
Printing Recommendations:
- Material: PLA is recommended for its ease of printing and good detail.
- Supports: May be needed for overhangs, depending on your printer's capabilities.
- Infill: 15-20% should be sufficient.
- Layer Height: 0.2mm for a good balance of speed and detail.
Assembly: Simply print the parts and assemble them according to the design. The spring mechanism from 3DPrinty should make it straightforward.
Enjoy your Nikola Tesla bobblehead!
Giấy phép
File mô hình
Đang tải files, vui lòng chờ...
Vui lòng đăng nhập để bình luận.
Vui lòng đăng nhập để khoe bản in của bạn.
Chưa có bản in nào được khoe. Hãy là người đầu tiên!
Chưa có bình luận nào. Hãy là người đầu tiên!