Skip to main content
F3D
Giá đỡ phù hợp cho IKEA Samla 22 lít 1

3 images

Máy In 3D

Giá đỡ phù hợp cho IKEA Samla 22 lít

By H3dSprint

Downloads
13
Likes
4
Views
207

Files 4 1.4 MB

  • bracket_1_1765569743.stlSTL · 392.6 KB
  • bracket_2_1765569744.stlSTL · 321.5 KB
  • bracket_1_mirrored_1765569745.stlSTL · 392.6 KB
  • bracket_2_mirrored_1765569746.stlSTL · 321.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Part is printed with PETG and need only partial support.

Part list:

  • bracket 1 | quantity: 1
  • bracket 2 | quantity: 1
  • countersunk screw ⌀3x16 (for wood) | quantity: 7
  • hexagon nuts M4 | quantity: 3

Print instruction:

  • supports: bracket 1: recommended for area of the round; bracket 2: no support
  • layer height: 0,2mm or 0,3mm
  • nozzle diameter: 0,4mm or 0,6mm
  • brim: not required
  • enclosure: recommended

Assembly instruction:

  1. deburr parts if needed
  2. add hexagon nuts M4 (3x) to the bracket 1
  3. allign bracket 1 and bracket 2 and fix parts using countersunk screws ⌀3x16; tighten the screws carefully to avoid part get broken
  4. assemble bracket to e.g. your enclosure using bolts M4 (3x)

Repeat the same actions for the mirrored parts to get the brackets for the samla box.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
1.4 MB
Largest file
392.6 KB

0 comments

See all