Giá đỡ Sherpa mini cho Voron 0.1

WARNING: With a 10mm high fan, Y must not go under 4mm, the front screws that hold the fan will hit the enclosure door.

Mount works with stock x-axis carriage, It also supports 30x30x10 mm fans. Mount only needs 4 heat inserts- to screw in the Sherpa mini, the rest is self-supporting with self-tapping screws.

The hardware needed for it to work is:

2x m3*4mm heat insert

2x M3x25mm BHCS or SCHS for mounting to x carrier

2x M3x12mm  BHCS or SCHS for fixing 30x30x10mm fan or 2x M3x10mm  BHCS or SCHS for fixing 30x30x7mm fan

2x M2x10mm self-tapping screws for fixing part cooling fan shrouds

2x M3x12mm BHCS or SCHS for fixing Sherpa mini 

2x 2.5mm zip ties for cable management, fixed to the fan shrouds

Printing instructions:

Print in asa/abs as normal head for temp resistance.

Note:

I modified only the middle part, left and right parts were from the original model.