
Ngôi sao Giáng sinh có đèn LED trên trụ
- Downloads
- 27
- Likes
- 5
- Views
- 259
- Remixes
- 0
- Comments
- 0
Files 3 9.9 MB
- Oz_Xmas_Tree_Star_1765718047.stlSTL · 7.6 MB
- Oz_Xmas_Tree_Star_1765718049.STEPSTEP · 141.3 KB
- Oz_Xmas_Tree_Star_Orca_1765718050.3mf3MF · 2.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #89898
- Category
- Sự Kiện - Lễ Hội
- Published
- License
- Creative Commons — Attribution
Description
Couldn't find a Xmas Star that would fit on an Australian Xmas pine tree. Needed a timber stick to poke down into tree. While modelling it realised I could fit the end of the LED string into the star.
Printed with zero infill and 1 perimeter to allow LED to shine through. With slicer cylinder modifier for infill to for a 4mm post. The bottom star tips also need support for overhang. It has an extra wide base to stick on the bed. Your printer may not be need it and can easily cut off with scissors. First print with a daggy bottom right star tip went on tree including , mistakenly used a 22min benchy profile.
Included STEP file so can be modified for different sticks and LEDs. Orca, Superslicer and others have modifiers that could be used in slicer to provide different opening and stick diameters. Didn't use Form360 or similar to model so can upload the model file.
Print spec
- Formats
- 3mfstepstl
- Model files
- 3
- Total size
- 9.9 MB
- Largest file
- 7.6 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -

-

-

-

-

-
New -

-
New

