
Máy In 3D
Giá đỡ linh hoạt cho máy in 3D với màn hình Android
- Downloads
- 47
- Likes
- 19
- Views
- 593
- Remixes
- 0
- Comments
- 0
Files 11 5 MB
- Bracket_-_Connector_beam_1766310299.stepSTEP · 96.3 KB
- Bracket_-_Bracket_interconnector_1766310299.stepSTEP · 34.7 KB
- Bracket_-_Bracket-_2X_1766310300.stepSTEP · 94.8 KB
- Bracket_-_Bracket_attachment_2X_1766310301.stepSTEP · 35 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #8864
- Category
- Máy In 3D
- Published
Description
A mounting bracket to attach a (repurposed) Android tablet that I use to monitor my prints via KlipperScreen, to my 3D-printer.
Specifics
- The model had to be able to be stowed away to the side (when not in use) and rotated in full view. Preferably with rotation and tilting of the screen.
- All connections are made with either M4x40 (2x) and M4x10 (4x) caphead screws and M4 Heat inserts.
- I choose to print in black PETG but PLA or ASA should also work.
- I added nylon M4 washers between all connections to create a bit more friction so it feels tighter.
- Cable management (USB-charging) is fully Tie-Wrap based (i.e. non excistant due to lack of inspiration…. apologies).
Equipement used / BOM
- RatRig VCore3.1-300 (other printers work just as well but hole pattern fits the 3030 extrusion mounting plates)
- Samsung Galaxy tab 8.4
- M4x40 (2x) caphead screws
- M4x10 (4x) caphead screws
- M4 Heat inserts
Onshape link
Print spec
- Formats
- stepstl
- Model files
- 11
- Total size
- 5 MB
- Largest file
- 2.6 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


