Skip to main content
F3D
Adapter gắn cứng cho vô-lăng Thrustmaster TMX/T150 1

6 images

Dụng Cụ Tiện Ích

Adapter gắn cứng cho vô-lăng Thrustmaster TMX/T150

By DockGuy

Downloads
720
Likes
41
Views
4,297
Remixes
1

Files 2 1.4 MB

  • TMX-T150-hard-mount-adapter-v2_1765704541.stlSTL · 1.1 MB
  • TMX-T150-hard-mount-adapter-v2_1765704542.stepSTEP · 346.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

With this replacement adapter, you can hard-mount your TMX or T150 steering wheel (possibly other models) instead of trying to use the bulky OEM clamp that is prone to cracking. 

Benefits:

  • inexpensive ($2 in plastic, $2 in nuts/bolts)
  • sturdy mount - wheel won't move unlike with the OEM clamp
  • frees up ~50mm under the wheel so you won't bump your knees
  • raises wheel ~16mm

Inspiration:

The design is similar to the Ricmo Tech adapter but with the following improvements:

  • 3 different M6 bolt-hole patterns to suit various mounts
  • cutouts for the rubber pads built into the bottom of the wheel for more secure mount
  • works with simple universal hardware instead of nutserts

Hardware needed:

  • Two M6 x 16mm (or longer) bolts with matching nuts and washers (nyloc nuts or lock washers recommended)
  • One M10 x 16mm bolt (1.5mm course thread) with matching washer and/or lock washer

Recommended print settings:

  • PETG (PLA and ABS probably OK but not tested)
  • 4 perimeters
  • 4 top layers
  • 4 bottom layers
  • 0.25 layer height
  • 20% triangle or gyroid infill
  • no supports necessary

Install instructions:

  • Place adapter plate on table or cockpit frame. Ensure the space for the M10 bolt is free from below.
  • Fix adapter plate in place with 2x M6 bolts + nuts/washers. Do not over-torque as you can crack the plastic
  • Carefully fit steering wheel into adapter plate
  • Fix steering wheel to adapter plate with single M10 bolt and washer. Do not over-torque as you can crack the plastic

Read more Show less

Print spec

Formats
stepstl
Model files
2
Total size
1.4 MB
Largest file
1.1 MB

0 comments

See all