Kẹp giữ sợi Filament
Bytinx_1344834Likes1.2KDownloads6K
Máy In 3D
Nắp lưng xtouch cho ốc lục giác
Remix of Vỏ ốp xtouch cho Bambu Lab P1P/S By TeachingTech
- Downloads
- 53
- Likes
- 5
- Views
- 346
- Remixes
- 0
- Comments
- 0
Files 1 231.6 KB
- rear_cover_with_hex_head_1765746939.stlSTL · 231.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #84247
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
Print with no supports, 0.2mm works fine.
The holes are “plugged” on purpose, to facilitate printing without supports, if they are still closed after printing is finished, clean it up with a properly sized drill bit, or even force through with the screw since it's just a single 0.2mm layer
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 231.6 KB
- Largest file
- 231.6 KB
0 comments
You may also like 12 models
See all-
-
CORE One/+ INDX printed parts
Byprusa-researchLikes0Downloads2.7K -
Khay Đựng Hạt Hút Ẩm Cho Lõi Cuộn SUNLU Spool
Byarhi_585078Likes64Downloads540 -
Phụ kiện đinh gai 3D cho giày Crocs - Tự tay tạo phong cách cá tính
ByHanzo3dLikes155Downloads413 -
Snapmaker U1 Poop Deflector
BydarienLikes0Downloads1K -
Dụng cụ hỗ trợ rút trục X (X-axis Rod Puller)
ByGeek5DLikes147Downloads484 -
Dụng cụ cạo bàn in / ron (Gasket Scraper) nhỏ gọn
ByBrokentooth_designsLikes23Downloads407 -
INDX Filament Sensor Bowden Adapter - ECAS04 & PC4-M10
ByvertigomakesLikes0Downloads560 -
Tay nắm cửa cho bộ khung Prusa IKEA LACK V2 từ 3D Sourcerer
By3DSourcererLikes48Downloads377 -
Original Desktop Filament Extruder MK3.9 by ARTME 3D
Byartme-3dLikes0Downloads333 -
Bản mod xích dẫn cáp (Drag Chain) cho Rat Rig V-Core 3
ByWyomingWolf_261196Likes52Downloads428 -
Máng Hứng Nhựa Thừa V3 cho Flashforge Creator 5 - Bản Xả Phía Sau
Bytopronix_2170418Likes41Downloads297
