
Chân đế lắp ren nhiệt (heat-set insert) phiên bản mới
Remix of Máy Ép Lắp Insert Ren Chìm By Adafruit
- Downloads
- 338
- Likes
- 118
- Views
- 4,243
- Remixes
- 2
- Comments
- 0
Files 12 3.2 MB
- cable-mount-cap_1765995409.stlSTL · 30.5 KB
- cage-position-limiter_1765995410.stlSTL · 17.1 KB
- cable-mount_1765995411.stlSTL · 85.7 KB
- 3030-leg_1765995412.stlSTL · 107.9 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Nắp đối trọng cho giá đỡ lắp insert ép nhiệtBytitleunknown_285431 · 12/14/2025
Kẹp Mỏ Hàn Cho Giá Lắp Chèn NhiệtBytitleunknown_285431 · 12/14/2025
Details
- Model ID
- #83909
- Category
- DIY
- Published
Description
This design is based on Adafruit's orginal jig: https://learn.adafruit.com/heat-set-rig
I had some 3030 aluprofile pieces at home so at first I decided to fit the original design. Later on I have:
- changed the carriage mount
- dropped the lever
- remodelled the upper pulley
- redesigned the tool clamp to be compatible with my Hakko FX-8801 soldering tool
- added a wire mount clamp on the top
BOM:
- a Hakko FX-8801 soldering tool (you can use any other tool but in this case you have to remodel the inside cutout of the clamp as it was designed to be a tight fit with my Hakko FX-8801)
- a piece of wood baseplate in ~250x300 mm size
- 1 pc M3x20 bolt for the upper pulley (no M3 nut needed)
- 1 pc M3x25 bolt for locking the tool clamp (no M3 nut needed)
- 4 pcs M3 heat-set insert for the trapezoid arm (I have used the ones from Ruthex's excellent inserts: https://www.amazon.nl/-/en/dp/B08BCRZZS3/ref=sr_1_1?dchild=1&keywords=ruthex&qid=1613643272&sr=8-1 )
- 2+2 pcs M3x8 Allen head bolts to mount the carriage and the tool clamp to the trapezoid arm
- 4 pcs M4 bolts or similar size screws to attach the bottom part to a baseplate
- 2+1+1 pcs M4x10 bolts for the M4 T-nuts
- 2+1+1 pcs M4 T-nuts to attach the bottom base, the upper cap and the limiter part to the 3030 aluprofile (the bottom / top locks are optional as the design is a tight fit)
- ~500 mm string for connecting the carriage to the counterweight
Feel free to alter the design: http://penoff.hu/Fusion360/heat%20set%20insert%20installation%20stand%20v44.f3d
Print instructions
All the parts are designed to print without supports. The top "cap.stl" is the only one which requires some bridging but I think it is still manageable without adding support structures.
Update 2022-09-03
I have uploaded the Fusion 360 CAD file.
Print spec
- Formats
- f3dstl
- Model files
- 12
- Total size
- 3.2 MB
- Largest file
- 1.8 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-
New -
New -

-

-
New -

-
New -


