
Đế Gắn Nhãn Tái Sử Dụng Cho Cuộn Bambu
- Downloads
- 103
- Likes
- 15
- Views
- 966
- Remixes
- 1
- Comments
- 0
Files 2 170.4 KB
- BX1C_Spool_Label_Mt01_1765699920.STEPSTEP · 103.1 KB
- Generic_BX1C_Spool_Label_Mt01_1765699921.3mf3MF · 67.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #83600
- Category
- Máy In 3D
- Published
Description
This label mount is just that, something to stick a self-adhesive label to a “stock” Bambu reusable spool. The mount is sized to accept a 2" x 1" [50 x 25mm] label. Of course, some slicers now have the ability to add text, so that is an alternate to the the paper label.
Originally I wanted, and actually tried a press-in attachment, but the small holes (.078”) in the Bambu spools meant small protrusions, which proved to be fragile. I considered drilling out the holes to a larger diameter, but there really is not a lot of material in-between the holes, so I decided to just use the protrusions as locating pins, and affix the label mount with a 7/8” [22.2mm] diameter “restickable” adhesive dot (https://a.co/d/5kJkOGv). The dots stick so well that I had to add small notches on each end of the mount so you can get a finger hold for removing the mount (could also use a small screwdriver).
If you use a filament dryer, you may want to remove the label mount before drying. Even at 40C, the dryer may be too hot for the dots.
I added a split face feature to the model which will allow the border to be “painted” using the triangles option (tedious, but it gets the job done). I find that having the border makes it easy to center the label. I printed the mount face down, with PLA at .16mm layer height.
Print spec
- Formats
- 3mfstep
- Model files
- 2
- Total size
- 170.4 KB
- Largest file
- 103.1 KB
0 comments
You may also like 12 models
See all-

-
New -
New -

-

-

-

-

-

-

-

-



