Skip to main content
F3D
Ốp Lưng Cho GameSir G8 (Phổ thông và Y700) 1

7 images

Dụng Cụ Tiện Ích

Ốp Lưng Cho GameSir G8 (Phổ thông và Y700)

By bassderek_760082

Downloads
1,356
Likes
63
Views
11,831
Remixes
2
Comments
13

Files 3 122.1 KB

  • G8_Back_Cover_200mm_universal_-_trim_to_fit_1766162065.stlSTL · 61.8 KB
  • G8_Back_Cover_99mm_Y700_1766162065.stlSTL · 58.7 KB
  • G8_Y700_Shim_1766162066.stlSTL · 1.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 2

See all 2 remixes

Description

Created this cover to create a nice visual appearance on the back of the GameSir G8 Controller. Especially helpful if you cut the tabs to hyperextend the controller to fit a tablet (such as the Legion Y700 pictured). Recommend printing upright on end with a brim, no supports needed. You can go without brim if you are printing a shorter spacer/back cover.

3 Files included:

  • 200mm universal - put your phone or tablet in your G8 and measure the gap at the back - then trim the file in your slicer to be about 1mm shorter than the gap (it needs to be slightly shorter so the springs can still clamp your device).
  • 99mm Y700 - pre-sized to fit Y700.
  • Y700 shim - due to the slimness of the tablet there is still a gap between the controller and tablet. Slide this in between so the controller feels more solid. I printed this with no top and bottom layers and honeycomb infill to keep it lighter.

Depending on how thick your phone/tablet is you may still want some sort of shim behind it.

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
122.1 KB
Largest file
61.8 KB

13 comments

See all