Skip to main content
F3D
Ngôi Sao Băng Giá "Frozen Star" 1

4 images

Sự Kiện - Lễ Hội

Ngôi Sao Băng Giá "Frozen Star"

By Aeonfly

Downloads
30
Likes
4
Views
336

Files 12 34.4 MB

  • Star_LED_0.3mm_PETG_MK3S_1h0m_1767565069.gcodeGCODE · 1 MB
  • Star_flashlight_button_0.2mm_PETG_MK3S_2h25m_1767565070.gcodeGCODE · 2.8 MB
  • Star_flashlight_switch_0.2mm_PETG_MK3S_2h20m_1767565072.gcodeGCODE · 2.6 MB
  • Star_flashlight_switch_1767565062.3mf3MF · 82.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Ein kleiner leuchtender Stern der etwas licht in die dunkle Jahreszeit bringen soll. Die Stirnseite wurde dabei so gedruckt das es aussieht, als sei er eingefroren.
Das Hauptteil also der Stern selber wird hierbei im Vasenmodus mit einer Schichtstärke von 0.3mm gedruckt und hat nur eine Boden und Deckschicht. Als Muster für den gefrorenen Effekt nehmt ihr dann die Achtstern-spirale. Alle anderen Teile habe ich mit einer Schichtstärke von 0.2mm gedruckt und für den Batteriekasten und der klappe benötigt ihr Stützmaterial.

Ich stelle zwei verschiedene Druckdateien zu verfügung. Der Unterschied besteht nur in der Klappe für den Batteriekasten. So könnt ihr auch Microlichterketten mit einem Schalter verwenden. Mein Favorit ist aber die Lichterkette mit Druckknopf und Timer.

Folgende Teile werden benötigt:
3D gedruckten Teile (Entscheidet vorher welche Lichterkette ihr verwenden wollt)
1x Senkkopfschraube M3x6mm oder M3x8mm
1x Sechskantmutter M3
Kleber
Microlichterkette zb. diese hier

https://www.amazon.de/Lichterkette-Batterie-Drahtlichterkette-Weihnachtsbeleuchtung-Batteriebetrieben/dp/B09L1LKWNT/ref=sr_1_22?crid=1YF3WTBH40WU1&keywords=vacoulery+lichterkette&qid=1701550028&s=lighting&sprefix=vacoulery%2Clighting%2C84&sr=1-22

https://www.amazon.de/dp/B08XZJY9RW?ref=ppx_yo2ov_dt_b_product_details&th=1

In English

Frozen star

A small shining star that is supposed to bring some light into the dark season. The front side was printed in such a way that it looks as if it was frozen.
The main part, i.e. the star itself, is printed in vase mode with a layer thickness of 0.3mm and only has a bottom and top layer. You then use the eight-star spiral as a pattern for the frozen effect. I printed all other parts with a layer thickness of 0.2mm and you need support material for the battery box and the flap.

I provide two different print files. The only difference is the flap for the battery box. You can also use micro fairy lights with a switch. But my favorite is the string of lights with a push button and timer.

The following parts are required:
3D printed parts (decide beforehand which fairy lights you want to use)
1x countersunk screw M3x6mm or M3x8mm
1x hexagon nut M3
Glue
Micro light chain e.g. these ones

https://www.amazon.de/Lichterkette-Batterie-Drahtlichterkette-Weihnachtsbeleuchtung-Batteriebetrieben/dp/B09L1LKWNT/ref=sr_1_22?crid=1YF3WTBH40WU1&keywords=vacoulery+lichterkette&qid=1701550028&s=lighting&sprefix=vacoulery%2Clighting%2C84&sr=1-22

https://www.amazon.de/dp/B08XZJY9RW?ref=ppx_yo2ov_dt_b_product_details&th=1

Read more Show less

Print spec

Formats
3mfgcodepdfstl
Model files
12
Total size
34.4 MB
Largest file
27.4 MB

0 comments

See all