Bảng Chữ Giáng Sinh “HoHoHo”

Easy to print and fun to make!

Perfect for your candy table, coffee table or any corner of your house

Specially designed to fit in the buildplate of any mid size printer, like ender 3 or similar.

The base is one piece. and every letter and details are separated files so you can print it in different colors with a single nozzle.

Designed two styles for every “O”. so you can choose what you like.

• First "O": choose between santa claus or tree ornament
• Second “O”: choose between snowman face or snowman body
• Third “O”: choose between reindeer or christmas elf

split the "Details" file in to parts with your slicer and just print the details you like for each one and glue them on top!

Print Settings

Material: PLA / PETG

Layer height: 0,28 mm for letters and base. 0.2 for details

Nozzle diameter: 0,4mm or 0,6mm

Infill: 10 -12%

Perimeters: 2

Supports: no

Printing Tip

the tolerances are a little tight, so make sure you don't have "elephant foot” in your printer to get them to fit right. if you can't avoid it then you just have to scrape or sand the base of each letter a little to make it fit. And if they are a little loose, use some glue to hold them

you can check all my original models here:

MEAFdesigns | Printables.com

________________________

If you like my designs and want to support me or sell physical prints, you can check out my patreon

https://www.patreon.com/meafdesigns

________________________