Kẹp Giữ Ổn Định Tủ Lack

I made my Ikea Lack enclosure 3 Lacks tall. It means less bending to work with my printer, but it also allows for a lot of wobble. The enclosure sits in front of a stove mantle in our garage so I made a mounting bracket that could clamp to it without damage. To help dampen the vibrations I added press fit pads printed in 40D TPU.

You need 2 of the TPU pads, one for the clamp body and one for the screw. You should screw the screw partway in before adding its pad.

Print instructions

• Clamp and Screw

  • 0.15mm layers
  • 0.4 mm nozzle
  • 3 perimeters
  • 5% infill
  • As pictured: Hatchbox black PLA

• TPU Pad

  • 0.15mm layers
  • 0.4 mm nozzle
  • 3 perimeters
  • 15% infill
  • As pictured: Filatech black FilaFlex40