
DIY
Máy phát điện quay tay
- Downloads
- 12,197
- Likes
- 3,078
- Views
- 92,688
- Remixes
- 4
- Comments
- 195
Files 14 211.8 MB
- 20x4mm_Spacer_1767543918.stlSTL · 140.7 KB
- 20x2mm_Spacer_1767543918.stlSTL · 140.7 KB
- 20x1mm_Spacer_1767543920.stlSTL · 140.7 KB
- 10x2mm_Spacer_1767543921.stlSTL · 140.7 KB
Make a variant with AI
Build another version of this model.
Remix versions 4
Máy phát điện quay tay đôi (Dual hand crank generator)ByCSeeling_3765167 · 02/24/2026
Stator Cuộn Dây RắnByLens_1625597 · 12/18/2025
Bộ chuyển đổi mũi khoan lục giác để quấn dây máy phát điệnByTeachingTech · 12/15/2025
Rotor Chỉnh Sửa Khe Nam Châm 30x10x5mmByS1Builder_414252 · 12/14/2025
Details
- Model ID
- #75051
- Category
- DIY
- Published
Description
Build Info:
- Parts can be printed from PLA.
- Higher grade magnets will produce more power (I used N52 grade).
- Coils can fit 350 turns of 0.4mm enamelled copper wire, but make sure the coils aren't too large for the template.
- All coil turn direction must be the same for all coils.
- Magnets must be mounted in alternating polarities.
- Make sure rotor magnets align when on the shaft.
- Magnets must be alternating poles, see video for reference.
Other required parts:
- Magnets 20x10x5mm (x32)
- Bearing OD 32mm ID 20mm W 7mm (x3)
- Bearing OD 26mm ID 10mm W 8mm (x2)
- Shoulder Bolt M8 x 60mm (60mm shoulder length)(x2)
- Copper enamelled wire 0.4mm (250grams be enough)
- Bolt M3 x 16mm (x16)
- Diodes 30V 5A (x4)
- Capacitors 30V 1000uF (x4)
- XT60 Connector
- Mini Digital Voltmeter 0.28 inch
- Silicone Wire 20AWG
- CA Glue
Print spec
- Formats
- stl
- Model files
- 14
- Total size
- 211.8 MB
- Largest file
- 42.9 MB
195 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-
New -
New -

