
Máy phát điện quay tay đôi (Dual hand crank generator)
Remix of Máy phát điện quay tay By TomStanton
- Downloads
- 1
- Likes
- 0
- Views
- 104
- Remixes
- 0
- Comments
- 0
Files 3 4.9 MB
- Bushing_1771911660.stlSTL · 22.2 KB
- DoubleCrank_PinionGear_Left_12t_1771911661.stlSTL · 2.4 MB
- DoubleCrank_PinionGear_Right_12t_1771911662.stlSTL · 2.5 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #225343
- Category
- Giáo Dục
- Published
Description
The 60mm bolt is replaced with a 130MM M8 threaded bolt (or threaded rod). The case remains unchanged at the print stage but a slight post print modification is made to let the M8 bolt travel all the way through (drilling out grinding out the stop). Given the bolt has no 10mm shoulder, 3D printed bushings (x3) are added.
The one sided pinion gear is replaced with a two part, dual pinion gear (12 teeth). Another copy of the same larger crank gear as the original can be printed for the left hand side.
All in all, a simple change, just one longer bolt/rod. All other parts are the same but you will need the extra bearing and bolt for the second hand crank.
The challenge is mounting the base somewhere solid while you crank. I think that from an ergonomic point of view one could change the crank radius, but I have not explored.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 4.9 MB
- Largest file
- 2.5 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-

-

-

-

-

