Giá đỡ màu filament mini Phil từ MatterHackers

At 42% of his original size, 3D Phil from MatterHackers is just the right size color swatch to help discern between different shades of filament color for those multi-color prints. This is a clip-on base to fit the mini Phil and attach to any filament box. The full sized version of 3D Phil comes from MatterHackers at https://www.matterhackers.com/store/l/matterhackers-mascot-phil-a-ment/sk/M6DV4FS2. I’ve included a 42% reduced Phil, so no need to rescale in your slicer.

Mini Phil is printed with a 0.4mm nozzle, 10% Grid density,  0.20mm quality layer height, 2 perimeters, 5 top layers, 4 bottom layers, and no supports. If your first layer is dialled in correctly, no brim is required. He takes just over an hour to print at regular speed and uses approximately 1.79m of filament.

The base is designed with a removable support, so no additional supports required. Printed with a 0.4mm nozzle, 15% Infill, 0.20mm quality layer height, 2 perimeters, 6 top and 4 bottom layers. If you want to print more than one, I recommend sequential printing unless you’re very confident with your bed adhesion and want to send it. One base takes about 34 minutes to print an uses approximately 0.88m of filament.