Skip to main content
F3D
Nắp bảo vệ trục X thấp cho CR-10 Smart Pro 1

1 image

Máy In 3D

Nắp bảo vệ trục X thấp cho CR-10 Smart Pro

By JamesCFoley_401007

Downloads
50
Likes
9
Views
565
Comments
3

Files 3 1.8 MB

  • CR-10_Smart_Pro_Belt_Cover_1766281271.stlSTL · 506.7 KB
  • CR-10_Smart_Pro_Belt_Cover_v2_1766281272.stlSTL · 498.2 KB
  • CR-10_Smart_Pro_Belt_Cover_Microprobe_v2_1766281273.stepSTEP · 860.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#5324
Category
Máy In 3D
Published

Description

If you have a CR-10 Smart Pro you know the hotend cooling fan is loud.  There's a 40mm fan adapter out there for the Sprite hotend but it interferes with the X Axis cover.  Well, this keeps everything working and even adjust the alignment of the limit switch. For use when converting to a static pressure fan for the heating element on a sprite extruder.

Version 1 you'll need to reuse your original hardware, M3 heat thread inserts, and as you can see in the pictures I didn't use M2 inserts to hold the limit switch.  If you have them use them, otherwise use anything else you have.

Version 2 the mounting holes are reduced to 2.65mm id to give plenty of plastic to cut threads into in case you don't have the brass inserts.  I don't think it would matter if you used the inserts or not in this case. I just had them and decided to use them.

Read more Show less

Print spec

Formats
stepstl
Model files
3
Total size
1.8 MB
Largest file
860.3 KB

3 comments

See all