
Giá đỡ công tắc để bàn cho thiết bị mạng
- Downloads
- 77
- Likes
- 17
- Views
- 925
- Remixes
- 1
- Comments
- 1
Files 11 1.7 MB
- Switch_Rack_-_1U_Blank_Plate_1765675397.3mf3MF · 16.8 KB
- Switch_Rack_-_Front_Supports_1765675398.3mf3MF · 28.5 KB
- Switch_Rack_-_1U_Blade_1765675398.3mf3MF · 19.8 KB
- Switch_Rack_-_TPLink_1U_Plate_1765675399.3mf3MF · 38.7 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #53068
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- Creative Commons — Attribution
Description
I am going to start off by saying that I am a total novice and have only been using Fusion 360 for about a month and really only started 3D printing about 4 months ago so this model probably has plenty of novice mistakes. Despite this, the model you see is the model that prints.
I designed this model as there was nothing I could find that satisfied my needs. I know that it is a bit basic but it works.
So far I have only created plates that match the equipment I need racking. I will be uploading more once it has been designed. For example, at some stage I will create a plate that will hold a few Raspberry Pi's. I also plan to create a part that will allow stacking of 2 or more racks. Watch this space!
The model uses standard 1U height plates with standard hole placements (width not standard)
Square holes also accommodate standard Rack/Cage nuts that you can buy from any network supply store.
I used modifier meshes method as demonstrated by Prusa3D to get the infill pattern on the side panels. See this video.
I printed the frame using PLA
The switch slots and 1U blades were printed using PETG for a bit more strength.
To print and assemble the full model you will need…
- 2x Switch Rack - Side Panel LeftRight
- 1x Switch Rack - Back Panel
- 1x Switch Rack - Uprights
- 4x Switch Rack - 1U Blade
- 2x Switch Rack - Front Supports
- 2x Switch Rack - Feet Cap
- Switch Rack - TPLink 1U Plate (optional) - Should fit standard Netgear desktop switches also
- Switch Rack - 1U Blank Plate (optional)
- Switch Rack - Ubiquity EdgeRouter X SFP (optional)
- Switch Rack - Cable Tidy 1U (optional. not yet tested avoid if possible)
- 16x M5 x 16 Socket cap screw (for the feet)
https://www.toolstation.com/stainless-steel-socket-cap-screw/p29995 - 16x Cage/Rack nuts (to mount switches)
https://www.amazon.co.uk/LMS-Data-Cage-Bolts-Washers/dp/B08S3NR6T4/ref=sr_1_2_sspa?crid=2TXMRGK2JF9DH&keywords=cage%2Bnuts&qid=1698346799&sprefix=cage%2Bn%2Caps%2C113&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
Print spec
- Formats
- 3mf
- Model files
- 11
- Total size
- 1.7 MB
- Largest file
- 1.4 MB
1 comment
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-

-

-



