
Máy In 3D
Giá đỡ quét 3D Beacon cho máy in Sovol SV06
- Downloads
- 75
- Likes
- 28
- Views
- 1,789
- Remixes
- 1
- Comments
- 13
Files 2 156.1 KB
- Beacon_Mount_SV06_1766524809.stlSTL · 95.9 KB
- Beacon_Mount_SV06_1766524810.stepSTEP · 60.2 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #49973
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
Description
Not compatible with SV06 stock part cooling fan. Several rear-mounted parts cooling fan mounts available on this site. I use a 5015 fan. I use the low-profile beacon model.
Remove stock Z probe & mounting bracket.
Required Hardware:
- M3x5mm heat insert for blind hole (blind hole is 10mm deep, so insert heights other than 5mm will work too)
- M3 hardware that ships with Beacon - I used one short to mount to the heat insert and had to shorten the longer screw with a grinder to mount to the bottom of the extruder
- Can re-use existing M3 screw that held the mounting bracket for the stock Z probe
For beacon section in klipper config:
X offset: 0
Y offset: -17.42
Print spec
- Formats
- stepstl
- Model files
- 2
- Total size
- 156.1 KB
- Largest file
- 95.9 KB
13 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-



