Skip to main content
F3D
Hộp đựng Wowstick đa năng chắc chắn (V2) 1

9 images

Large file collection DIY

Hộp đựng Wowstick đa năng chắc chắn (V2)

Remix of Hộp lưu trữ cho Xiaomi WOWStick với nam châm By shrtcrct

By Aikano9

Downloads
671
Likes
197
Views
5,193
Comments
51

Files 47 29.7 MB

  • Wowstick_Rugged_Case_V2_1766228363.stpSTP · 3.6 MB
  • Box_Latch_1766228364.stpSTP · 33.2 KB
  • Lid_Logo_1766228364.stpSTP · 449.7 KB
  • Lid_1766228365.stpSTP · 399 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Remixed the "Rugged Multipart Pinecil/TS100/TS80 Case (V2)" to fit both of my Wowstick drill and screwdriver (1F), and all of the 52 bits, 4 long bits, and the 6 drill bits, as well as most of the accessories the accessories except for the magnetic pad, stand, and the little glass container.

The case and inserts are the exact same size as PjotrStrog's rugged V2 case, all the inserts and parts are therefore interchangeable

I recommend adding a thin piece of felt or foam on top of the bits seeing as they can come loose if the box is shaken a bit too much.

Assembly requires 6x M3x20mm socket head cap screws. DO NOT USE COUNTERSUNK SCREWS

Printed on a Bambu Lab X1C in FilamentPM Prusa Orange PETG, and Prusament Galaxy Black ASA, 3 walls, top and bottom layers, 25% infill, all large parts are printed with a wide brim (~10mm)

Looser Tolerances: tolerances loosened for the bit slots

Single: Parts modified to work with the single wowstick insert

Due to variations in printer tolerances, consider printing the inserts in TPU, to make it easier to remove the bits

Read more Show less

Print spec

Formats
stlstp
Model files
47
Total size
29.7 MB
Largest file
3.6 MB

51 comments

See all