Skip to main content
F3D
Giá đỡ vat nhựa cho máy in 3D Elegoo Saturn 1

2 images

Máy In 3D

Giá đỡ vat nhựa cho máy in 3D Elegoo Saturn

By Jimmi

Downloads
1,015
Likes
157
Views
6,542
Remixes
3
Comments
38

Files 6 2.8 MB

  • Holder_1765662195.stlSTL · 389 KB
  • Funnel_1765662197.stlSTL · 500.1 KB
  • Funnel_Extended_1765662197.stlSTL · 491.5 KB
  • Base_1765662198.stlSTL · 565.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 3

See all 3 remixes

Description

I found a few resin vat holders but none that would fit my Elegoo Saturn. I decided to make my own version and share it with everyone!

Fitment is a little loose on purpose to accommodate the alignment bolts on the bottom of the resin vat and to avoid damaging the FEP film.

There is a 5 degree tilt to allow the resin to flow off the vat easier.

Please use the test print to help adjust tolerances where needed, different printers and parts may fit more snug or loose depending on tolerance stacking.

YOU WILL NEED:
3x M5 Nut
3X M5x20mm Bolt
1x 20x20x400mm (or longer) extruded aluminum T-Slot (V-Slot has different geometry)

These are the parts I have used:

Extrusions: https://www.amazon.com/gp/product/B07V32DJJP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Nuts and Bolts: https://www.amazon.com/gp/product/B07WZHN2XS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

NOTE: I am NOT affiliated with any of the products linked above and DO NOT receive anything (monetary or otherwise) from purchases.

I have also included the designer I got the idea from: "True_Scott". They did a great job but it did not fit my specific printer. I also added some features I liked but kept some features I did like.

If you do not have an Elegoo Saturn then check out their design, it may just work for you!

UPDATES:

V1.1 Changes:
-Increased clearance on vat holder to prevent damage to FEP film.

V1.2 Changes:
-Increased vat screw cutout size.

V1.3 (Current Version) Changes:
-Increased base thickness.
-Recessed base to help with spills and adds rigidity.
-Includes a larger base for larger bottles!

Original idea for this project: https://www.thingiverse.com/thing:4149707

Printer:    MK3S+

Rafts:    No

Supports:    Yes

Resolution:    0.15

Infill:    20%

Filament brand:    Prusament

Filament color:    Galaxy Silver

Filament material:    PLA

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
2.8 MB
Largest file
687 KB

38 comments

See all