
Vỏ ESP32 Type C với hai nắp cho Home Assistant
- Downloads
- 933
- Likes
- 81
- Views
- 5,783
- Remixes
- 1
- Comments
- 7
Files 3 34.9 KB
- case_bottom_1766524697.3mf3MF · 30.2 KB
- case_top_header_1766524697.3mf3MF · 2.5 KB
- case_top_closed_1766524698.3mf3MF · 2.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #43480
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
- Tags
Description
I got myself some ESP32 to use as a bluetooth proxy in Home Assistant and needed a case for them.
The ones I found online were not really what I was looking for or weren't for the board version I got.
So I designed a case myself. It is a tight fit (around 0.2mm clearance betweent bottom and top).
I made two top parts, one with access to the headers on the board and one which is fully closed.
I also accounted for the boot and reset button on the bottom part, in case you need to press them with a paperclip or another pointy thing.
The USB-C port is completely accessible (as you can see in the last two pictures).
Printing
I printed the case in PLA with 0.24mm layer height, 20% infill and 3 perimeters.
Bottom and fully closed top needed around 12,5g of filament and took around 39 minutes to print on my Ender 3.
ESP32 I used (Amazon.de, no affiliate link)
Print spec
- Formats
- 3mf
- Model files
- 3
- Total size
- 34.9 KB
- Largest file
- 30.2 KB
7 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-



