
Khay Đựng Tua Vít Mag10 (Mag10 Screwdriver Tray)
- Downloads
- 4
- Likes
- 2
- Views
- 389
- Remixes
- 0
- Comments
- 0
Files 7 2.3 MB
- Screwdriver_Tray_Single_60mm_Hex_Mag_1786416529.stlSTL · 390.7 KB
- Screwdriver_Tray_Single_80mm_Mag_1786416530.stlSTL · 356.1 KB
- Screwdriver_Tray_Single_80mm_Hex_Mag_1786416530.stlSTL · 350.9 KB
- Screwdriver_Tray_Single_120mm_Mag_1786416531.stlSTL · 309.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #417811
- Category
- DIY
- Published
Description
Description
This is a variation on my Grid10 design. This is the Mag10 version. This screwdriver organizer is a magnetic version that doesn't require the Grid10 Base Plate. This version has 15x3mm magnet holes in the base. Use N52 magnets for best results. Enjoy!!!
Grid10 Organizer
I’ve seen a lot of great tool organizer designs out there, but as an aircraft mechanic who’s constantly in and out of my toolbox all day (and with a son who’s also an aircraft mechanic), proper tool shadowing is non-negotiable for us.
Instead of traditional foam, I wanted something far more durable, rugged, and with a cleaner-look. So I designed Grid10/Mag10.
Grid10 is a modular 3D-printed tool organization system. The base plates hook together using simple 3D printed plastic “dog-bone” links. Accessories are secured with common #4 sheet metal screws.
The Grid10 Base Plate
This is the foundation of the system — a universal organizer designed to fit nearly any toolbox drawer. Every plate includes grooves and pilot holes so you can securely mount a wide variety of tool holders, bins, and custom organizers.
Multiple sizes are available, along with edge and corner pieces to let you tile the drawer perfectly from edge to edge.
-
Magnet holes (5 mm × 2 mm) are included on the bottom if you prefer not to fill the entire drawer. (Note: holes are slightly loose due to magnet manufacturing tolerances — a drop of glue is recommended.)
-
Grooves are spaced 10 mm apart and designed at a 60° angle (2 mm wide at the top, 1.5 mm deep). This allows components to be fastened with a single screw while preventing rotation.
Important Notes:
-
Edge models (16 mm, 13 mm, and 10 mm) only have dog-bone link cutouts — no grooves or pilot holes.
-
“Edge” models have three sides with link holes and one blank side (these do include grooves and pilot holes).
-
“Corner” models come in RH and LH versions (e.g., 025×040 = 25 mm × 40 mm Right Hand, 040×025 = 40 mm × 25 mm Left Hand).
Metric to Imperial Conversion:
To convert mm to inches: divide by 25.4 Example: 10 mm ÷ 25.4 ≈ 0.394"
To convert inches to mm: multiply by 25.4 Example: 0.375" × 25.4 ≈ 9.525 mm
Example:
For a 19.25" wide drawer (≈ 488.95 mm), you could use a 240 mm + 230 mm + 16 mm plate (total 486 mm). The small ~3 mm gap is easily handled with the bottom magnets. Alternatively, swap the 16 mm for a 20 mm plate (total 490 mm) and lightly trim the edge for a perfect fit.
Filament:
I have used Sunlu PLA 2.0+ with great success on all of these prints. I have had no serious issues with warping or fracturing. Always print these models with at least three walls for maximum durability.
Print spec
- Formats
- stl
- Model files
- 7
- Total size
- 2.3 MB
- Largest file
- 394.9 KB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


