Skip to main content
F3D
ExoGuitar - Ngựa đàn - Tune O' Matic - Single Plate 1

1 image

DIY

ExoGuitar - Ngựa đàn - Tune O' Matic - Single Plate

By spikeon

Downloads
1
Views
41

Files 3 687 KB

  • exoguitar_bridge_tune-o-matic-single-plate_print--tune-o-matic-single-plate_1785763710.3mf3MF · 221 KB
  • exoguitar_bridge_tune-o-matic-single-plate_model_1785763711.stepSTEP · 149.5 KB
  • exoguitar_bridge_tune-o-matic-single-plate_model_1785763713.stlSTL · 316.5 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com

Plan Your Build & Get Hardware

ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoGuitar parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoGuitar - Bridge - Tune O' Matic - Single Plate, on our site.

Step 1 - Insert M8 Heat Set Inserts

While you are doing this, Strip 2 inches of a wire and wrap that around the outside of one of the heat set inserts. This will be your bridge ground wire.

Step 2 - Insert M5 Slide In Nuts to 2020 extrusion

Step 3 - Attach Bridge Plate to 2020 with M5x30 bolts

Step 4 - Attach Tune O' Matic

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $5.27 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $24.37.

Read more Show less

Print spec

Formats
3mfstepstl
Model files
3
Total size
687 KB
Largest file
316.5 KB

0 comments

See all