Skip to main content
F3D
Giá treo máy thổi lá Ryobi P21010VNM 1

5 images

DIY

Giá treo máy thổi lá Ryobi P21010VNM

By sanslos_96700

Downloads
1
Views
27

Files 1 553.7 KB

  • Ryobi_P21010VNM_Leaf_Blower_Mount_v5_1784619732.3mf3MF · 553.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#414657
Category
DIY
Published

Description

This is a simple two-screw wall mount for the Ryobi P21010VNM Leaf Blower.

The tool was scanned (using a Creality CR-Scan Ferret SE), and the scan was used as a template for the mount surface.  The mount surface is slightly enlarged and simplified just to smooth the surface, but since the tool just hangs straight down it isn't necessary to have a perfect fit.

I printed it in PETG, heat resistant for mounting on my garage wall.  The mounting holes are sized around 3/16" screws, I used 2 3/8" long screws partially because I had them on hand but also some of the tools are a bit heavy.  Even so it's probably overkill :-)

The model was printed with supports, but they aren't really needed (and they slow down the print since I used PLA for supports).  It also used mouse ears to help prevent the model from lifting. The print sits upright, with the tilted bottom sitting on the build plate.  That makes the print simple, and also provides strength since the layer lines are not all horizontal.

Note that I only provide the 3mf model file (not the sliced version).  3mf provides a bit more information than stl, but I find using the sliced 3mf can create confusion when moving between printers.  Make sure to treat the two members of the 3mf (tool and mount) as different objects, and simply delete the tool when slicing.  I provide both for visualizing the design, but the tool is not intended to be printed.

Read more Show less

Print spec

Formats
3mf
Model files
1
Total size
553.7 KB
Largest file
553.7 KB

0 comments

See all