Bộ vỏ Bolt-On AAIO cho QMX

By evadub

Downloads: 2
Likes: 0
Views: 32
Remixes: 0
Comments: 0

Download all (.zip)· 5 files · 1 MB· 1 MB

Files 5 1 MB

Bolt_on_type_PTT_MIC_5521_1784618488.stlSTL · 396.3 KB
Bolt_on_type_PTT_MIC_USBC_1784618489.stlSTL · 378 KB
Bolt_on_type_PTT_MIC_1784618490.stlSTL · 137.5 KB
Port_cover_for_bolt-on_enclosure_1784618490.stlSTL · 95.6 KB
Frame_1784618491.stlSTL · 57.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #414445
Category: Dụng Cụ Tiện Ích
Published: 07/21/2026
License: Creative Commons — Attribution — Noncommercial
Tags: bolt
speaker
mic
qmx
aaio

Show more tags Show fewer tags

Description

This is the bolt on version for the AAIOv1 board.

Must be installed with any 1.5-1.6mm thick plate still on the radio side. Use the factory aluminum plate, a factory side rail or either of my published end plate designs but do not use with end plates or rails that are thicker than 1.6mm or thinner than 1.5mm.
You need to print and use the frame at the far left side of the bolt on enclosure if you are not using a factory side rail.
If you have some TPU, I highly recommend printing the port cover. Not using the port cover does degrade audio quality.

Print with 0.2mm layer height.

If you already have a plug in style AAIO and want to try this out, you will need (4x) m2.5x33mm flat head bolts. I think 35mm will work but I have not tested yet (I will update this when I have)