
Bộ khấc chặn flaps (flap detents) cho Virpil CDT VMAX
- Downloads
- 1
- Likes
- 1
- Views
- 31
- Remixes
- 0
- Comments
- 0
Files 6 628.3 KB
- Glue_plate_1784358586.stlSTL · 31.9 KB
- Cover_1784358587.stlSTL · 106.1 KB
- Undercarriage_1784358588.stlSTL · 44 KB
- Lever_lock_1784358589.stlSTL · 56.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #413035
- Category
- Dụng Cụ Tiện Ích
- Published
Description
Flaps detent system for Virpil CDT VMAX (haven't tested with Prime).
You will need need:
1 Hex Socket Spring Ball Plunger M5x12mm (Or M5x10)
2 Screws M3x6mm countersunk.
Tapping kit (M3 and M5) - optional
Assembly:
- Remove Rubber handle (it slides off with wiggling).
- Unscrew flaps cover, and secure undercarriage under it.
- Dry fit the cover, detent arch and glue plate. Glue it into a single assembly, preferably not on the throttle.
- Secure lever carriage and lever lock onto the lever. The holes can be tapped, but using sacraficial screw also works. Attach rubber handle.
Print spec
- Formats
- stl
- Model files
- 6
- Total size
- 628.3 KB
- Largest file
- 316.7 KB












