Seed Catcher v2.0 - Phễu Thu Hạt Tối Ưu Hóa

SEED CATCHER - V2.0

Simplified. Stronger. Better Flow.

FEATURES

• 2" wide hopper (internal)

• 1/8" wall thickness

• Smooth radiused funnel

• Centered outlet with hose bead

• Left overflow shield (1/8" thick)

• Reinforced mounting ears

• 1/8" drain notch (rear bottom)

• Water-tight all around

DESIGN NOTES

• Smooth radiused funnel prevents seed bridging

• Centered outlet for even flow

• The hose bead keeps the hose secure

• The drain notch allows water to escape

• 1/8" overflow shield keeps seed in box

PRINTING RECOMMENDATIONS

• Print orientation: Rear side down (as shown)

• Layer height: 0.20mm

• Walls: 4 Perimeters

• Infill: 20% or more

• Recommended material: PET or ASA

MATERIAL: PET /ASA/ABS

WALL THICKNESS: 1/8° (0.125*)

ALL DIMENSIONS IN INCHES DESIGNED FOR 3D PRINTING

NO SUPPORTS NEEDED

Drawn From:

The dimensioned drawing was very confusing. Each view had different dimensions so had to make a lot of it up on the fly.

https://www.facebook.com/groups/424805480329761/permalink/1022765130533790/