Archimedes MK2 Windturbine

Thanks again to Lukass for the great Archimedes wind turbine.

For my second remix, I used the original size of the Archimedes spiral and created a new frame with ball bearings and five different sets of tails. It turns even with barely perceptible wind.

Assembly is illustrated in the image. Required items: 1x stainless steel or brass rotor shaft (5x245 mm), 1x stainless steel or brass vertical shaft (8x90 mm), 2x 685ZZ ball bearings, 4x M3x6 screws, 1x rod or tube for the mount. If the rotor shaft in the wind turbine is loose, you can carefully screw in two clamping screws at the rear if necessary, after first drilling out the holes with a 2.5 mm bit. The vertical bearing facilitates the rotation of the vertical axis and can be glued in with a drop of glue. The 16x8 holder can be attached to the mounting plate.

I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA, if the printer is suitable for ASA.

I would be happy about a make or remix...

I would also like to recommend my other wind turbines:

Double wind turbine MK3 counter rotating

https://www.printables.com/model/883528-double-wind-turbine-mk3-counter-rotating

Illusion Windturbine MK2 counter-rotating

https://www.printables.com/de/model/895957-illusion-windturbine-mk2

Double rotor addon for wind turbine MK2

https://www.printables.com/de/model/887565-double-rotor-addon-for-wind-turbine-mk2

Wind Turbine MK3 neo Remix

https://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remix

Archimedes Wind Turbine Remix

https://www.printables.com/de/model/773350-archimedes-wind-turbine-remix

Ugrinsky Vertical Axis Wind Turbine Remix 

https://www.printables.com/de/model/769216-ugrinsky-vertical-axis-wind-turbine-remix

Mini Airplane Wind Turbine

https://www.printables.com/de/model/643163-mini-airplane-wind-turbine

Savonius Vertical Wind Turbine Remix 

https://www.printables.com/de/model/775074-savonius-vertical-wind-turbine-remix

Darrieus Savonius Turbine Ver.2 Remix 

https://www.printables.com/de/model/776180-darrieus-savonius-turbine-ver2-remix

Illusion Windturbine 200 / 250

https://www.printables.com/de/model/785427-illusion-windturbine-200-250

Toroidal Illusion Windturbine 

https://www.printables.com/de/model/790615-toroidal-illusion-windturbine

Illusion Windturbine TIE F. Tail Fin

https://www.printables.com/de/model/796246-illusion-windturbine-tie-f-tail-fin

Wind Turbine 620 mm

https://www.printables.com/de/model/810511-wind-turbine-620-mm

Wind turbine savoniov helix – Remix

https://www.printables.com/de/model/843331-wind-turbine-savoniov-helix-remix