
Khuôn lấy dấu khoan lỗ cho kệ IKEA Billy
- Downloads
- 7
- Likes
- 4
- Views
- 41
- Remixes
- 0
- Comments
- 0
Files 2 1.9 MB
- 20260701_kelpie_ikea-billy-drill-hole-template_1783322801.stepSTEP · 1.5 MB
- 20260701_kelpie_ikea-billy-drill-hole-template_1783322802.stlSTL · 391.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #408081
- Category
- DIY
- Published
Description
An simple drill hole template for IKEA Billy.
Print settings
-
+ tested with PETG - PLA, ASA, ABS possible
-
0,2mm layer height
-
3 perimeterlines
Accesories:
-
3,5mm wood drill bit
-
power drill
How to use
-
Print the template
-
Place tamplate pins into existing holes
-
drill trough tamplate holes
________________________________________________________________________________________________________________________________
Changelog
- v1.0 - 20260703 - Upload
Licence
You are NOT allowed to use this model, if you don't agree to one or more of these rules:
-
You are free to use the model in any noncommercial way. That means you can print it for yourself or others, as long as you don't follow business interests.
-
You are free to remix the model. All remixes must be shared under the same license agreement as the original model, including this text and the license details below.
-
If you send the model to someone else, this text and the license details must be transmitted together with the model.
-
You are NOT allowed to earn money with this model or remixes of this model, as long as you didn't get a specific license for this use case. Get in contact if you're interested. This includes the use for commercial events, festivals or similar, where you don't directly sell this model or prints of it, but use it as a giveaway or present to your paying customers or visitors.
-
You are NOT allowed to share this model on other platforms under your own name, this includes remixes that are only a minimal change to bypass this rule.
-
You are ABSOLUTELY NOT ALLOWED to upload this model or remixes of it on the platform www.makerworld.com.
If in doubt whether your use case of this model violates the license agreement, feel free to get in contact for clarification.
Print spec
- Formats
- stepstl
- Model files
- 2
- Total size
- 1.9 MB
- Largest file
- 1.5 MB












