Đế dựng màn hình M5Stack Paper Color e-paper

M5Stack Paper Color e-paper Display (SKU: C151) Stand, with integrated USB C cable management.  A portrait version stand is also available.

Designed to integrate with the display's built-in clip indentations.  The display is angled for easy viewing.

Print with support

• With access to Support for PLA/PETG, I recommend printing front face down, using a PLA/PETG support material interface layer to allow the support structure to release from the printed part.  When printed front face down, any support interface layers are on the same layers, to reduce  filament swaps and print time.

• Without access to Support for PLA/PETG, I suggest printing on its left-side face to improve display clip strength.  It is also possible to print bottom down if your aim is to reduce support contact points for a cleaner finish… but don't over flex/stress the clip while mounting / unmounting the display, to avoid possible layer line breaks.

Prints well in PLA, although PETG may be a more robust choice for long-term use.

If planning to power via USB, rather than built-in rechargeable battery, I  would suggest using a low profile style Flat 90-Degree / Right Angle USBC to USBC cable (example) to help the connection blend in.  The built-in cable management fits a typical ~3mm cable diameter - See pictures.

Printed with a 0.4mm nozzle.  .08 mm layer height gives an excellent finish, but 0.2mm also works well for this use-case.