Nắp che Camera Pi cho InnoMaker 720P

I suggest printing the Front part at 100% Infill and 3 Walls.
The back cover is fine with 25% and 3 Walls and should be printed with supports (Clamps Up)

(Sadly I didnt calibrate my new filament properly for the first print as seen i had some massive under extrusion)

Cam in question: https://amzn.eu/d/02xxFQXl

What youll need:

• 4x M2xD3xL2.5 Brass Nuts

• 4x M3xD5xL3 (or L4) Brass Nuts

• 4x M2x4mm Screws

• 4x M3x4mm Screws