
Giá đỡ cuộn nhựa PolyDryer, trục bạc đạn, chốt
Remix of Trục ổ bi có ren cho Polydryer By EricKeiffer_1223410
- Downloads
- 0
- Likes
- 1
- Views
- 58
- Remixes
- 0
- Comments
- 0
Files 5 10.2 MB
- PolyDryer_Spool_Holder_-_axle_1780510624.stlSTL · 4.2 MB
- PolyDryer_Spool_Holder_-_collar_1780510625.stlSTL · 2.9 MB
- PolyDryer_Spool_Holder_-_collar_with_handle_1780510626.stlSTL · 3.1 MB
- PolyDryer_Spool_Holder_-_bearing_bridge_1780510627.stlSTL · 56.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #396969
- Category
- Máy In 3D
- Published
- License
- BSD License
Description
Filament holder for the Polymaker PolyDryer container using 6904-2RS bearings (20×37×9 mm).
Inspired by the holder created by Clough42 and its later remixes by LencoSolutions, Eric Keiffer, and MakingMedicalPhysics, I decided to create my own version.
The parts are designed with a tight fit to prevent them from sliding off the axle. Some force is required to press the bearings onto the axle and the bearing bridge onto the bearings. If you are unable to assemble the parts, calibrate your extrusion multiplier.
Print settings for:
- PolyDryer Spool Holder - axle.stl
- PolyDryer Spool Holder - collar with handle.stl
- PolyDryer Spool Holder - collar.stl
Layer height: 0.2 mm
Perimeters: 3
Top and bottom solid layers: 5
Infill: 15%
Print settings for:
- PolyDryer Spool Holder - bearing bridge.stl
Layer height: 0.2 mm
Vase mode: enabled (1 perimeter)
Top and bottom solid layers: 0
Extrusion width: 0.8 mm (printed using a 0.4 mm nozzle). See PolyDryer Spool Holder - bearing bridge.3mf
Print spec
- Formats
- 3mfstl
- Model files
- 5
- Total size
- 10.2 MB
- Largest file
- 4.2 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -

-

-

-

-

-

-

-


