(ALPHA) Đầu còi Whelen Vortex/4004 mini có thể hoạt động

ATTENTION: THIS IS AN ALPHA RELEASE, SO YOUR MODEL MAY NOT COME OUT THAT GREAT IN QUALITY.. 

MORE STABLE VERSION COMING LATER..

Recommended speakers: https://www.amazon.com/Cylewet-Diameter-Speaker-Loudspeaker-Arduino/dp/B0CDXQ8JTC/ref=sr_1_3?crid=35H9QXDXL2HRW&dib=eyJ2IjoiMSJ9.WflbW1GwUUPlo_fGVMDwF64QOrdyfRtjHGvnwyl6tTxKOwyjFb5uudaJQLiX-lbhL6n_hM-tOaB4Gg9HzVrmHF5McjrzJgInpgDw3ypVm4HSin2qoWRsTsDABRx_xYDaVla6HJ8UjQGlhp0PB6jf-o93BJsKSTOivWS8TERvIZ7ewzhXk3jCg3b16LEbP1O2VIVakarBY-MHu7hyu_4LywI23Z7ovBnAnPAoTpWfOQk.vBzNcfwuO0osGCaXBeK3ovodOMv-6BEezghFJUwJvws&dib_tag=se&keywords=cylewet+40mm+speakers&qid=1780161813&sprefix=cylewet+40mm+sp%2Caps%2C1347&sr=8-3

For this assembly, you'll need 14 M3x10 screws, 4 40mm speakers with wires connected to them. And optional 6 2-56x3/8 Pan Head Machine Screws (May switch over to these screws in the actual final product)

To remove the modeled supports, just give them a twist and they should come off.

First, install the speakers to the middle horn piece with 4 blobs of hot glue.

Next, pass the wire through the speaker housing cap and install 6 M3x10 screws.

Then install the end horn piece with 4 M3x10 screws (Or superglue)

And to install it on a permanent surface, install the mounting bracket on a surface or pole with screws of your choice, then install the head on the bracket and put in 4 M3x10 screws.

To install it on a 2" balsa wood pole, attach the mounting bracket to the head first, then attach the pole adapter and use 6 2-56x3/8 Pan Head Machine Screws to install it

And hook it up to an amplifier of your choice that can support 20W.