Skip to main content
F3D
Hệ thống làm mát dưới đáy cho Minisforum HM90 1

6 images

Dụng Cụ Tiện Ích

Hệ thống làm mát dưới đáy cho Minisforum HM90

By TheFlocke_280962

Downloads
45
Likes
6
Views
708

Files 2 16.5 MB

  • HM90_Downside_Cooling_0.4n_0.2mm_PETG_MK3S_11h18m_1766199159.gcodeGCODE · 15.2 MB
  • HM90_Downside_Cooling_1766199158.stlSTL · 1.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Minisforum HM90 downside cooling is a case thats attaches to the bottom of the minicomputer and holds two 2.5inch disks with a fan that cools all components from the bottom.

If you want to recreate this you will need:

When you have all the parts you will have to:

  1. Connect the drives to the extension cables
  2. Screw the drives in with the extension cable under the disk
  3. Modify the fan like shown on the pictures so it will fit into the case
  4. Screw the fan into place (keep in mind to put the extension cables aside the fan like shown in the pictures)
  5. Get the motherboard out of the case
  6. Use wire taps (in German “Strom Diebe”) to “steal” to power from the original fan for our Fan
    • Yellow → +12V
    • Black → Ground
  7. now put everything back together and connect the disks
  8. Screw the bottom to the original case

And you are Finished!

If you want to Improve or change something in my design you can use that link to Onshape:

https://cad.onshape.com/documents/7ddad239f31c6e9aa02d299e/v/e940db737e20759fb48a59fa/e/c10858452c7fa4380984e520?renderMode=0&uiState=65214a40e0bdcc302384a433

Read more Show less

Print spec

Formats
gcodestl
Model files
2
Total size
16.5 MB
Largest file
15.2 MB

0 comments

See all