
Bộ chuyển đổi nguồn pin (Battery Eliminator) cho Canon LP-E6
- Downloads
- 0
- Likes
- 0
- Views
- 49
- Remixes
- 0
- Comments
- 0
Files 4 135.9 KB
- lpe6v2_1780225453.stlSTL · 60.6 KB
- lpe6v2_1780225454.scadSCAD · 2.9 KB
- lpe6v2-clip_1780225454.stlSTL · 6 KB
- lpe6v2-withclip_1780225455.stlSTL · 66.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #392231
- Category
- Dụng Cụ Tiện Ích
- Published
Description
I am building an AC adapter for my canon 60D. This should fit in the battery slot and give me a way to route wires from the contact points to an external DC power supply.
update 1 - Corrected some glitches on the right side rail, and fixed some errors. The original scad file really wasn't going to work without some sanding.
Test Print Results - Jan 29th/2015: The print fits in the charger, but the slots for the rails are not quite large enough to fit in the camera. I could Dremel it out, but I will adjust the .scad and stl files as soon as I have a chance. Pretty damn close for my first go at it. I think the slot for the battery connections needs to be shifted a bit as well.
Update 2 - Jan 29th/2015: Rebuilt the rails, and redesigned the wire guide for providing power to the pins. I have added slots for each pin that keep the wires separate, and a tight fitting clip to hold the wires in place. I plan on cementing or solvent welding it in place once the wires are set.
Print instructions
Category: Camera Instructions
Not recommended for use yet: I took the dimensions by eye and with a normal office ruler. I won't post the STL until I have done a test print. I also haven't figured out what to fit into the base of the power slots so that it can connect to the AC adaptor. I also haven't looked up what the voltage/current requirements are. I was going to regulate to 7.2 volts, and guess that the camera draws no more than an amp, but I am sure looking up the specs for the canon sold adaptor should tell me what I need to know.
Print spec
- Formats
- scadstl
- Model files
- 4
- Total size
- 135.9 KB
- Largest file
- 66.5 KB












