
Máng ăn cho chim ruồi kèm giá đỡ cố định
- Downloads
- 7
- Likes
- 2
- Views
- 64
- Remixes
- 0
- Comments
- 0
Files 5 8.5 MB
- Hummingbird-Bracket_6_Port_Base_V3.1_1780211926.3mf3MF · 7.5 MB
- Hummingbird-Flower_6X_1780211928.3mf3MF · 866.8 KB
- Hummingbird-Bracket_V3.1_1780211929.3mf3MF · 62.5 KB
- Hummingbird-Bracket_V3-Round_Ant_Moat_1780211930.3mf3MF · 51.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #391817
- Category
- Đồ Gia Dụng
- Published
- Tags
Description
This hummingbird feeder supports video and picture taking by preventing the feeder movement in the wind. Video capturing software can then reliably detect motion near the feeder. The feeder uses a PET soft drink/water bottle as the nectar reservoir. Designed for PCO 1810 bottle threads, see attached picture.
FIles include:
-
a feeder stand which can be mounted to a post,
-
a ant moat cup that's filled with water to prevent ants reaching the hummingbird nectar,
-
6 Port feeder,
-
and 6 "flowers"
Printed in PCTG to be more UV resistant. The 6 Port feeder and flowers should be printed with build plate supports.
For the ant moat and 6 port base to be water tight:
-
check the print seam gap setting, I used -80%
-
Perimeters - ant moat: 3, 6 port base: 2
-
Top contact Z distance: 0.1 detachable
-
Filament extrusion multiplier: 1.07
-
Infill/perimeters overlap: 25%
Perch is positioned so it facilitates hummingbirds sitting at a feeding port, unfortunately this results in the perch several mm above the print bed requiring supports.
I wanted the feeder to stationary so the fit between the 6 port base and the post bracket is tight to reduce wind vibrations and motion. I used a 5/8" or 16mm forstener bit to clean up the port base mounting hole and sandpaper on the top 30 mm of the post to smooth out the filament ridges.
Print spec
- Formats
- 3mf
- Model files
- 5
- Total size
- 8.5 MB
- Largest file
- 7.5 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-

-

-
New

