
Dụng cụ lăn Braid cho đường đua Slot Car
- Downloads
- 23
- Likes
- 7
- Views
- 351
- Remixes
- 0
- Comments
- 0
Files 3 1.2 MB
- Braid_Roller_1780018110.stlSTL · 119.3 KB
- Braid_Roller_Handle_1780018111.stlSTL · 887.3 KB
- Braid_Roller_1780018112.3mf3MF · 271.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #388417
- Category
- DIY
- Published
- License
- Creative Commons — Public Domain
Description
The roller is just under 3/4" wide (19mm actual width) with a "blade" that is just under 1/8"wide/thick and 4mm tall/deep. If you have an uncommon braid width and slot, feel free to contact me for a revised roller.
Large handle with texture (fuzzy skin option in slicer) for comfortable and sure grip wile using.
You will need a 1.5" 1/4-20 bolt and nylon lock nut, as well as two R188 ball bearings for the roller.
Print in your favorite material in the provided orientation. No supports needed!
Suggested print settings:
-
100% infill and 3 perimeters
-
Use random seam to prevent any seam bump that may require post processing to smooth out
-
Use a height range or other modifier for the bottom 125mm of the handle to change to 20% Gyroid infill and add fizzy skin texture of your choosing. The whole handle doesn't need to be 100% infill, but the end where the roller goes should be solid for strength.
-
Provided 3mf file has settings ready to go, just change to your printer and filament.
Print spec
- Formats
- 3mfstl
- Model files
- 3
- Total size
- 1.2 MB
- Largest file
- 887.3 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-
New -
New -
New -

-

-
New -

-
New
