
Electrolux Hygienic 800 - Adapter chuyển Oval sang Round
- Downloads
- 28
- Likes
- 0
- Views
- 150
- Remixes
- 1
- Comments
- 0
Files 2 834.2 KB
- Electorlux_Hygenic_800_round_adapter_1778227060.stlSTL · 538.8 KB
- Electorlux_Hygenic_800_round_adapter_1778227061.3mf3MF · 295.5 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #378780
- Category
- Đồ Gia Dụng
- Published
Description
This is an adapter for the Electrolux Hygienic 800 vacuum cleaner, which normally uses an oval connection. Sometimes a round pipe is more practical, so I designed this adapter to allow that. The round part outer diameter is ⌀ 35 mm.
Special feature: inside the adapter, there's a built-in nut holder for an M3 screw. If your printed part doesn’t fit tightly, you can insert a nut and screw to secure the connection firmly.
This is a working prototype that has performed well for me.
I printed it on a Prusa Mini+ using PrusaSlicer.
Note: due to typical slight shrinkage during printing, the inner holes turned out a bit smaller than in the 3D model, making a very tight connection to the vacuum cleaner — but it still works fine.
I may update the design in the future based on further testing.
Printing recommendations:
Printer: Prusa Mini+
Slicer: PrusaSlicer
Supports: Not needed
Layer height: 0.2 mm recommended
Material: PLA or PETG
Print spec
- Formats
- 3mfstl
- Model files
- 2
- Total size
- 834.2 KB
- Largest file
- 538.8 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-
New -



