
Tấm chắn mùn gỗ cho router sled (Router sled blast shield)
- Downloads
- 0
- Likes
- 1
- Views
- 79
- Remixes
- 0
- Comments
- 0
Files 3 123.1 KB
- Screen_Side_Hinge_1778206536.stlSTL · 46.8 KB
- Screen_Attachment_1778206537.stlSTL · 30.7 KB
- Cart_Side_Hinge_1778206538.stlSTL · 45.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #377537
- Category
- DIY
- Published
Description
This is a simple bolt on addition to my router sled design the provides a flip down shield to deflect some of the wood chips generated when using the router.
Print settings:
Filament: PETG or PLA
Supports: None
Orientation: Use the orientation of the pieces in the build files.
Additional Materials:
1 piece of plexiglass or similar cut with whatever size shield you want.
6x m5 nuts
4x m5x12 hex socket bolts ( You may need shorter or longer bolts depending on the thickness of the plexiglass you chose )
2x m5x25 hex socket holts
Assembly:
Attach the screen hinge and cart side hinge to each other using 2 m5x25 hex socket bolts and 2 m5 nuts. Attach the cart side hinge to the router cart from the router sled. Use the 4x m5 socket bolts in the router cart that are holding it to the linear rail bearing assembly. See photos for correct placement.
Drill 4 5mm holes through the plexiglass using the screen attachment piece as template. Sandwich the plexiglass between the screen hinge and screen attachment pieces and secure with 4x m5x12 hex socket bolts and nuts.
Tighten or loosen the 2 m5x25 hinge bolts to control how easy it is to rotate the shield.
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 123.1 KB
- Largest file
- 46.8 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-
New -

-

-
New -

-
New

