Skip to main content
F3D
Tấm front plate thay thế cho tophat SV08 MAX 1

2 images

Máy In 3D

Tấm front plate thay thế cho tophat SV08 MAX

Remix of Top hat Sovol SV08 Max By Green Flying Cubic Liquid Flying Cubic Liquid

By torch_1785844

Downloads
1
Views
45

Files 2 1.2 MB

  • SV08_MAX_nameplate_for_tophat_1778179731.stlSTL · 982.6 KB
  • nameplate_Body_Meshed_1778179732.3mf3MF · 195.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#376345
Category
Máy In 3D
Published

Description

This just fits the MAX's huge print bed diagonally. Make sure you have your settings dialed in so it doesn't warp. I included both the .stl and the .3mf files, but be forwarned: I use Demon's DKEU so some of the g-code may not be fully compatible with a factory-fresh firmware. 

I attached it with 2.3mm self-tapping plastic screws instead of double sided tape. I don't trust tape! Use the plate as a template and drill 1/64" pilot holes in the tophat frame. 

NOTE: I printed the tophat itself with a 0.8mm nozzle, but for this I used the standard 0.4mm, for crisp lettering.

Read more Show less

Print spec

Formats
3mfstl
Model files
2
Total size
1.2 MB
Largest file
982.6 KB

0 comments

See all