
Gá hỗ trợ lắp profile CD60 cho trần drywall (uchwyt do karton-gipsów)
- Downloads
- 824
- Likes
- 133
- Views
- 3,048
- Remixes
- 0
- Comments
- 0
Files 5 2 MB
- gk_mount_plate_1777827920.stlSTL · 780 KB
- gk_mount_base_1777827921.stlSTL · 978.4 KB
- gk_mount_nut_1777827923.stlSTL · 209.3 KB
- gk_nuts_1777827925.pdfPDF · 12.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #373411
- Category
- Đồ Gia Dụng
- Published
Description
Why?
My buddy showed me those when we were talking about a drywall ceiling I was about to put up in my living room. While many different tools like that exist already I wanted to make my own to practice CAD and add mounting for the “laser shield”
The model is mine and made from scratch, but I can't claim the idea is original, there's plenty of tools like that. I made one to practice and add the laser shield.
Features
You can install the whole CD60 profile framing basically on your own, level everything nicely with the help of a laser and then screw the profiles to the hooks without much hassle (one that tried to do this with two hands know how tricky this work is).
Print settings
- No supports
- Use something else than PLA, PETG is fine
- 0.3 mm layer height
- 0.45 mm wall width
- 15% infill
Bill Of Materials
For one mount you'll need:
Item
Qty
Description
M8 screw 30-40mm
2
See drawing bellow for details on the length
M8 nuts
4
gk_mount_base
1
Printed
gk_mount_nut
2
Printed
You can use almost any M8 screw that sticks out about 18mm from the base of the nut into the base part. If using a cap head that can go into the nut a 30mm screw is great. If the screw has a head that won't fit inside then a 40mm is good.
If you'd like to use the “laser shield” you need a few additional parts listed below.
You might want to print 5 of those in total and have only 2 with the shield.
Item
Qty
Description
Heat inserts M3 x D4.6 x L4.0
2-4
2 pcs for each side, one side might be enough
DIN 912 M3 x 8mm
2-4
Same deal as above, 2 might be enough
gk_mount_plate
1
Printed, pause before the last layer stars to switch to a different color
Print spec
- Formats
- pdfstl
- Model files
- 5
- Total size
- 2 MB
- Largest file
- 978.4 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-
New -

-

-


