Skip to main content
F3D
Adapter gắn accelerometer nozzle BTT S2DW cứng cáp hơn 1

2 images

Máy In 3D

Adapter gắn accelerometer nozzle BTT S2DW cứng cáp hơn

By PrintingPerspective

Downloads
185
Likes
31
Views
1,275

Files 4 444.5 KB

  • BTT_S2DW_adapter_melt_in_1777818496.stlSTL · 159.7 KB
  • BTT_S2DW_adapter_removable_1777818497.stlSTL · 141.8 KB
  • BTT_S2DW_adapter_melt_in_1777818497.stepSTEP · 71.5 KB
  • BTT_S2DW_adapter_removable_1777818498.stepSTEP · 71.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is an adapter for the BTT's S2DW accelerometer - https://biqu.equipment/products/adxl-345-accelerometer-board-for-36-stepper-motors?variant=40446852759650

It allows you to mount it more rigidly rather than using provided soft washers that clamp onto all electronic components:

Or if you don't use those you will short or destroy components because they are placed too close:

The Melt-in version has longer feet that allow you to melt them for a more permanent attachment. But this version interferes with the provided bolt when screwing in place but works okay with the V6 nozzle as a clamping bolt. My recommendation is to print both versions and see how it works with your setup.

The Removable version is just for placing the adapter temporarily as a spacer.

I printed with a 0.3mm nozzle and it fits great. It is a very small part so the smaller the nozzle the better, but you can always try it with a regular 0.4mm.

Read more Show less

Print spec

Formats
stepstl
Model files
4
Total size
444.5 KB
Largest file
159.7 KB

0 comments

See all