
Bàn phím cơ hand-wired 3dp fc660 v3 OLED
Remix of Clueboard / FC660m 66% Mechanical Keyboard v2 (Bản in 3D, handwired) By admin
- Downloads
- 139
- Likes
- 42
- Views
- 1,923
- Remixes
- 0
- Comments
- 0
Files 19 5.4 MB
- bezel_right_no_oled_1777806848.stlSTL · 99.8 KB
- bezel_right_1777806849.stlSTL · 104.1 KB
- case_left_1777806850.stlSTL · 197.9 KB
- case_right_1777806852.stlSTL · 205.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #372363
- Category
- Dụng Cụ Tiện Ích
- Published
- Tags
Description
This is a hand wired keyboard. Please be familiar with the process of hand wiring before undertaking this project. Inspiration for this project comes from this hero.
Features
- 5° typing angle
- Low profile front height
- Supported layouts:
- Split backspace
- ISO enter
- Split left shift
- Split right shift
- Stepped caps lock
- JIS bottom row
- If I haven't included your preferred combination, please feel free to edit the source file and share
- Vial compatible
- Bongo cat
Parts
Aside from the printed pieces and tools, you will also need:
QTY
Part
Comment
1
ATmega32U4 MCU
e.g. Arduino Pro Micro or Teensy 2.0.
14
M3 threaded insert (5 mm OD, 3 mm length)
14
M3 bolt (8-10 mm length)
1
0.91 inch OLED module 128×32
≈66
MX keyswitch
Exact number depends on layout.
≈66
Diode
e.g. 1N4148.
2-6
Plate mount stabilisers
Exact number depends on layout.
≈3
Cable ties (3 mm width)
For securing the MCU to the case.
Wire
Solid wire recommended over stranded.
Wiring guide
Do not wire the rows all the way across. The Arduino Pro Micro only has 20 pins therefore we must use a 10×8 matrix (10 rows, 8 cols) with the last two pins running the OLED display. See diagram below for wiring. The row and col are labled on the top left legend.
Matrix
Pin
MCU
Pin
Matrix
Row 9
D3
RAW
Row 8
D2
GND
GND
RST
OLED GND
GND
VCC
OLED VCC
OLED SDA
D1
F4
Col 0
OLED SCK
D0
F5
Col 1
Row 7
D4
F6
Col 2
Row 6
C6
F7
Col 3
Row 5
D7
B1
Col 4
Row 4
E6
B3
Col 5
Row 3
B4
B2
Col 6
Row 2
B5
B6
Col 7
Row 1
Row 0
Firmware
Default firmware with Vial support is included in the ‘Other files’ section. Flashing is easy with QMK Toolbox.
Source code:
- QMK https://github.com/qmk/qmk_firmware/tree/master/keyboards/handwired/3dp660_oled
- Vial keymap https://github.com/xia0/vial-qmk/tree/3dp660_oled/keyboards/handwired/3dp660_oled/
Cardboard design
Print spec
- Formats
- f3zstlzip
- Model files
- 19
- Total size
- 5.4 MB
- Largest file
- 3.4 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-
New -

-


