Đường ray cho tàu LEGO nhỏ

Lego has made a nice little Christmas train (30584 - Winter Holiday Train), but unfortunately there are no tracks for this train, as it is too small for Lego's own train tracks. But then you can just make them yourself.

This is a set of prints for straight and curved rails, switch tracks, bridge and buffer stop, made for a 4 Lego brick unit wide train.

The rails are designed so that they can be printed without support - except for the bridge, which should have a support in the middle.
 

The traks can be printed in two colours, so that the sleepers and rails each get a different colour. It is done simply by printing the first 2mm in color for sleepers and the rest in the color for the rails.

It is easier to assemble the railway by pressing the rails together vertically.

Warning: The bridge is mostly for decoration. It is too high and steep for the train to run properly. But it is nice to look at.