Đế sạc Xiaomi Watch 2 dùng cổng USB-C (Charging Dock)

For my old smart watch, I had a charging dock with a USB-C socket that was super small and easy to transport, and a USB-C cable is always at hand. However, I could only find Xiaomi Watch 2 charging docks with an attached cable, which is more inconvenient.

So here is a solution.

Printed with Orca Slicer using PLA+, with 2 walls, 20% infill, and tree supports.

For assembly:

1. First, cut the cables to the right length—it's best to keep an extra 2 mm.
2. Solder the cable end and a small drop onto the pogo pin just above the base.
3. Solder the cable end perpendicular to the pogo pin.
4. Clear the pogo pin holes (e.g., with a drill or a spare pogo pin). Using pliers may easily damage the pogo pins.
5. Install the socket, pogo pins, and cables—make sure + and - are right.
6. Click the magnets to the watch bottom, mark them, and where they should go—make sure they have the right orientation and position.
7. Check if the pogo pins are straight and fully pushed to the bottom.
8. Press fit the case from the top.

Additional parts:

• 9.99 € 10x Pogo Pins L 9mm x W 2mm / T 1.4mm https://www.amazon.de/dp/B007Q847I0?psc=1&ref=ppx_yo2ov_dt_b_product_details
• 6.99 € 10x USB-C socket with cable https://www.amazon.de/dp/B0C6D633WJ?psc=1&ref=ppx_yo2ov_dt_b_product_details
• 4,99 € 60x Neodym magnets 6 mm x 3 mm

5x charging dock with USB-C socket for ~23 €, while a charging dock with cable costs around 10 €.